Cleaning And Maintenance; Service Centre - Probuilder 11856 Manual De Instrucciones

Use
The hoist can lift/winch loads using single
or double cable. Lifting capacity is doubled
using double cable.
When stopping the hoist during
lowering, the item can drop a couple of
centimetres more due to inertia. This is
normal.
The stop block above the hook (4) will
prevent the hook being wound into the
drum and getting stuck.
Winching/lifting with single cable
Roll as much cable off the drum to allow the
hook to reach the item using the hoist/lower
button on the remote control (10).
Attach hook securely to the item.
Rewind the cable using the hoist/lower
button until the item is at the desired height/
position.
When the hoist/lower button is released, the
hoist will stop immediately.
Winching/lifting with double cable
Roll approx. a meter of cable off the drum
and � t the pulley (4) onto the cable. Secure
the hook onto the hoist housing.
Roll as much cable off the drum to allow the
hook to reach the item using the hoist/lower
button on the remote control.
Lift the item as described above.

Cleaning and maintenance

Wipe off with a damp cloth. Lubricate
moving parts with oil.
Check regularly that the cable is in good
condition.
Check regularly that all bolts, brackets and
nuts are tight.

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• www.schou.com
GB
31