Important Recommendations; Troubleshooting - Kitett KOLOR PLAY Manual De Instrucciones

Important recommendations

Use - Functionality
•This device must not be left within the reach of unsupervised children or animals
GB
(risks caused by detachable components).
•The device should be installed and started up in accordance with the information
supplied in the accompanying documents.
•The device must only be used under the operating conditions indicated by the
manufacturer.
•If you notice that the device is not working correctly, contact your supplier.
•This is a fragile medical device, to be handled with care.
•No specific knowledge or training is required to use this device.
•Take care to keep these instructions with the device as they contain the information
needed on how to use the equipment correctly.
•The Export version breast shield (with Export screw thread) can only be used with a
corresponding bottle (same screw thread).
CAUTION, in all cases:
•WARNING: No modifications permitted.
•WARNING: Only use the accessories supplied and listed in the instructions for use.
• Do not thaw or heat the collected milk in the microwave.
• If signs of degradation or color change appear, please replace the accessories.

Troubleshooting

Problem
Low or
non-existent
suction on the
Expression Kit
18
Solution
Check that the breast shield is fully screwed onto the bottle (screw
tightly).
Check for presence of taupe-coloured «Clean Valve» specific to manual
breast pump.
Check the right positioning of the transparent valve on the ring of
the 'Clean Valve'.
Check the membrane is fixed on its base.
Check the membrane and the handle are fixed onto the body of the
breast pump.
Check the state of the seal between the breast shield and the
feeding bottle.