System-Related Operation; Self-Test; Error Conditions - Keysight U2751A Guía Del Usuario Y Servicios

System-Related Operation

This section provides information on system-related topics such as executing a
self-test, performing self-calibration routine, and reading error conditions.
Do not connect any terminal block or cables prior to performing self-test
NOTE
process.

Self-Test

To perform the self-test, proceed as follows.
Keysight Measurement Manager Operation
Ensure that the switch terminals are not connected to any instrument. Turn on the
U2751A. On the application panel, select Tools > Sel f-Test. This will perform a
series of communication tests on the module, which take a couple of seconds to
complete.

Error Conditions

Keysight Measurement Manager Operation
A message box will appear once an error occurs while operating the U2751A
using the Keysight Measurement Manager.
Keysight U2751A User's and Service Guide
Operation and Features 2
41