Cleaning & Disinfection - Drive DeVilbiss Healthcare Vacu-Aide 7325 Serie Guía De Instrucciones

6' (1.8 m) Patient Tubing (single-patient use)
1. Disconnect from lid.
2. Rinse thoroughly by running warm tap water through it.
3. Follow by soaking in a solution of 1 part vinegar (>=5% acetic acid
concentration) to 3 parts water (55˚C-65˚C / 131˚F-149˚F) for 60
minutes. Rinse with clean, warm water and air dry.
4. Keep outer surface clean by wiping with clean, damp cloth. Inspect
tubing, replace if the tubing or ends have cracks or damage.
Suction Unit (single-patient use)
CAUTION
Do not submerge in water as this will result in damage to the vacuum pump.
NOTE– Do not use any cleaners or disinfectants that contain ammonia, benzene and/or
acetone to clean the unit.
1. Turn unit Off and allow vacuum to drop.
2. Disconnect from power source.
3. Wipe the housing with a clean cloth and any commercial (bacterial-germicidal)
disinfectant.
Carrying Case (single-patient use)
1. Wipe with clean cloth dampened with detergent or disinfectant.
AC to DC Adapter
1. Disconnect AC to DC adapter from unit and from power source.
2. Wipe AC to DC adapter housing and cords with a dry cloth.
Cleaning & Disinfection
Disposable container
Reusable container
Pump enclosure, power cord
* number of cleaning / disinfection cycles determined by recommended cleaning interval and expected service life.
EN - 14
Recommended cleaning / Number of cleaning /
disinfection interval disinfection cycles *
As needed 30
As needed 30
As needed 30
Compatible cleaning / disinfection agents / max washing temperature
Dishwashing liquid or 1 part vinegar to 3 parts water for 60 minutes or 30 dishwasher cycles,
top shelf only, water temperature to be 55˚C to 65˚C (131˚F to 149˚F)
121˚C (250˚F)
Autoclave, 15 min @
Mild detergent or 1:5 chlorine bleach (5.25%) and water solution, Mikrobac forte, Terralin Protect
A-7325