Cleaning And Maintenance - TurboTronic Turbolux aqua TT-LUX900 Manual De Instrucciones

CLEANING AND MAINTENANCE

Emptying and cleaning the dust compartment/filter
• Release the hand unit out of the handle
• Remove the whole dust container (10) by pressing the release button (5) and turn the dust
container.
• Pulling out the filters (8 & 9) and emptying the contents of the dust container into a suitable vessel
or bag.
• The dust container and the filter can be cleaned and rinsed with warm
water. Make sure the parts are dry before they are assembled.
• Assembling the parts by following up the opposite procedures when detaching the dust container.
Cleaning the electric turbo brush
• If the roller brush becomes blocked or jammed for any reason, the
vacuum will be lower down. Than the roller brush have to be cleaned.
• Carefully open the releasing slider as the pic below
• Lift out the roller brush and clean it.
• After cleaning you can assemble the turbo brush by following the opposite procedures.
Do not forget to Cleaning the wheels too.
• If a wheel is jammed by threads or dirt, to prevent wear you need to clean this by time.
• Remove the wheels by carefully prizing them loose using a screwdriver inserted into the cavity
and lift them up.