Technical Specifications - Dell PowerVault MD3600i Introducción Al Sistema

Technical Specifications

Drives
PowerVault MD3600i
PowerVault MD3620i
RAID Controller Modules
RAID controller modules
Back-Panel Connectors (Per RAID Controller Module)
iSCSI connectors
SAS expansion connector
Serial connector
Management Ethernet connector
Expansion
PowerVault MD36xxi
20
Getting Started With Your System
All manuals and user guides at all-guides.com
Up to twelve 3.5-inch SAS hot-swappable
hard drives (3.0 Gbps and 6.0 Gbps)
Up to twenty four 2.5-inch SAS
hot-swappable hard drives (3.0 Gbps and
6.0 Gbps)
• One or two hot-swappable modules
with temperature sensors
• 2 GB of cache per controller
Two 10 GB iSCSI IN connectors to
connect hosts
One SAS OUT port for expansion to an
additional PowerVault MD12xx enclosure.
NOTE:
One 6-pin mini-DIN connector
NOTE:
One 100/1000 Base-T port Ethernet for
out-of-band management of the enclosure
Supports a maximum of 96 hard drives with
any combination of PowerVault MD1200 or
PowerVault MD1220 expansion enclosures.
NOTE:
expansion enclosures.
Redundant path connectivity provides
redundant data paths to each hard drive.
SAS connectors are SFF-8088 compliant.
For technical support use only.
You cannot use more than seven