General Characteristics; Return To Cembre For Overhaul - Cembre HT-TC055 Manual De Uso Y Mantenimiento

ENGLISH

1. GENERAL CHARACTERISTICS

– Application range: suitable for cutting steel ropes and conductors with overall diameter as indi-
cated in § 6.
– Rated operating pressure: ........................................................................................... 900 bar
– Dimensions: length ......................................................................................................... 595 mm (23.4 in.)
width .......................................................................................................... 144 mm (5.6 in.)
– Weight: ................................................................................................................................. 8,3 kg
– Oil: .......................................................................................AGIP ARNICA HI 32
– Operating positions. The three operating positions are identifi ed on the main handle (200), which
rotates relative to the reference symbol
– Advancing speed. The tool automatically switches from a fast advancing speed of blades to a
slower cutting speed.
– Safety. The tool is provided with max pressure valve; MPC1 special manometer, is available upon
request to check the proper setting of the valve.

2. RETURN TO Cembre FOR OVERHAUL

In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certifi cate supplied by Cembre together with the tool or fi ll in and attach
the form available in the "ASSISTANCE" section of the Cembre website.
HYDRAULIC CUTTING TOOL
HT-TC055
SHELL TELLUS OIL TX 32
(see Fig. 1 page 3).
Rest position (Handles locked): lock handles together by means of
the handle latch (49) when tool is not in use.
Release position: close the moveable handle (202) against the fi xed
handle (200), in order to discharge the oil pressure and retract the
blade.
Operating position: on releasing the moveable handle (202), the
fi xed handle (200) rotates automatically to this position.
Operate the moveable handle (202) to build up pressure and close
the blades.
(13,050 psi)
(18.3 lbs)
or
or equivalent
4