Inputs / Outputs Connections; Symbols And Icons On The Display - XS 70 Serie Manual De Instrucciones

IMPORTANT:
When the Sleep mode is active (by default after two minutes of inactivity of the instrument) press

any key to reactivate the brightness of the display.
 Only at this point do the keys regain their function.
 Inputs / Outputs connections
Use original accessories guaranteed by the manufacturer only.
If necessary, contact your local distributor.
The BNC connectors are protected by a plastic cap.
Remove the cap before connecting the probes.
RCA for pH temperature probe
Micro USB for connection
to PC and power supply
BNC for pH/ORP
electrodes
READ THE MANUAL BEFORE PROCEEDING TO CONNECT THE PROBES OR PERIPHERALS
 Symbols and icons on the display
Symbol Description
M+
Number of data stored in Data Logger
mode on instrumental memory
Instrument connected to the DataLink+
software
FIXED: Calibration deadline set for that
parameter
INTERMITTENT: Calibration deadline
active for that parameter
DHS digital sensor active
Measurement stability indicator
UM Serie 70Vio EN rev. 1 04.06.2020
PC 70 Vio top panel
Symbol
12
RCA for Conductivity temperature probe
BNC for conductivity cell
Description
Error in measurement or
calibration
FIXED: Automatic Data Logger set
INTERMITTENT: Automatic Data
Logger in operation
Press the directional keys to change
the parameter or value on the
display
Battery charge indication
The bars scroll if the measurement
is not stable
EN