Sophos CS101-8 Manual Del Usuario página 10

ENGLISH
LEDs on each RJ45 Ethernet Connector
LK/AT
(Link/Activity)
(Right LED)
CS101-xx Models
Speed
(Left LED)
[on PoE models: LED Mode button not pressed]
1G Ports on CS110-xx and CS210-xx Models
Speed
(Left LED)
[on PoE models: LED Mode button not pressed]
2.5G Ports on CS210-xx Models
Speed
(Left LED)
[on PoE models: LED Mode button not pressed]
CS101-8FP (PoE) Models only
Mode
(Left LED)
[LED Mode button pressed]
CS110/210 P/FP (PoE) Models only
Mode
(Left LED)
[LED Mode button pressed]
8
Green Solid
Flashing
Off
Green Solid
Off
Green Solid
Amber Solid
Off
Green Solid
Amber Solid
Off
Green Solid
Off
Green Solid
Amber Solid
Off
1. Ethernet port has established link.
2. Good connection between the ethernet
port and connected device.
The port is sending or receiving network data.
1. The adapter and switch are not receiving power.
2. No connection between both ends of network.
3. Network drivers have not been loaded or do not function correctly.
Ethernet port is operating at 1000 Mbps.
Ethernet port is operating at 100 0r 10 Mbps (if LK/AT LED is active).
Ethernet port is operating at 1000 Mbps.
Ethernet port is operating at 100 Mbps.
Ethernet port is operating at 10 Mbps (if LK/AT LED is active).
Ethernet port is operating at 2500 Mbps.
Ethernet port is operating at 1000 or 100 Mbps.
Ethernet port has no link
PoE switch provides power to the port
No power is provided to the port
PoE switch provides power to the port
Error
No power is provided to the port
Quick Start Guide Sophos Switch Series