Placing The Filter; Before First Use - Create THERA RETRO MATT Manual De Instrucciones

• To ensure you get the best coffee possible, please rinse the coffee maker before its first use.
• Fill up the tank with water without exceeding the "MAX" line marked on the tank. Then cover
the water tank.
Note: The appliance is supplied with a detachable tank to allow for easy cleaning. You can
detach the tank to fill it up and then place it back into the appliance.
• Place the filter in the filter holder (make sure there's no coffee in the filter).
• Place a mug on the drip tray.
80
40
0
ºC
Note: The appliance is not equipped with a mug; please use your own coffee mug.
• Plug the coffee machine in and press the ON/OFF button "
on. Press the coffee button "
" " again and the machine will start preheating. When the coffee indicator lights green, it
means the temperature is hot enough.
• Press the coffee button "
is no longer dripping, pour out the processed water and clean the container thoroughly. Now
you can start brewing.
Note: There may be a noise when pumping the water out for the first time, it is normal; the appli-
ance is simply releasing trapped air. After approximately 20 seconds, the noise will disappear.
8 E N G L I SH

PLACING THE FILTER

1. To insert the filter in the filter holder, please align the notch on
the filter with the ridge inside the filter holder.
2. Now turn the filter to lock it in place. This will secure the filter in
the filter holder.
3. Lift the tab to hold the filter holder and shake out the coffee
after use without removing the filter.

BEFORE FIRST USE

40
0
". As soon as water starts coming out press the coffee button
" and allow the entire tank of water to flow out. Once the machine
80
ºC
". A red indicator light will turn
80
40
0
ºC