Maintaining the Print Head
Cleaning the Print Head
1
Press [ON/OFF] to turn on the machine.
2
Press [Menu] repeatedly to select <MAINTENANCE>.
3
Use [ ] or [ ] to select <CLEANING> or <DEEP CLEANING> as
necessary, then press [OK].
Aligning the Print Head Automatically
1
Press [ON/OFF] to turn on the machine.
2
Press the Open button to open the Paper Output Tray, and open up and
set the extension by pressing down the hollow on its front side.
3
Press [Menu] repeatedly to select <MAINTENANCE>.
4
Load a few sheets of A4 or Letter-size plain paper in the Auto Sheet
Feeder.
5
Use [ ] or [ ] to select <AUTO HEAD ALIGN>, then press [OK].
6
The pattern is printed.
Chapter 9
Maintenance
47