Publicidad
Idiomas disponibles
Idiomas disponibles
Remote control user manual
Learning method of remote control:
Power on the receiver, press the (j) key at the emitter at once. The learning is succeed, when hear
double beep ringing from the loudspeaker.
• RF wireless digital transmission technology is adopted to realize the one-to-one control providing a
rate of coincident
Notices
1. When the emitter is unable to remotely control the receiver, Please check whether the switch
batteries are in good contact, whether they are fixed properly and whether they run out of use.
2. When the emitter is unable to remotely control the receiver, please check whether there is other
remote control products around the space and check whether the keys are pressed down, because
same nature of remote control product may cause interference with each other resulting in poor
receiving effect. Taking away such articles will normalize the remote control function. (the infrared
remote controller is not included).
3. Too low voltage in battery will lead to failure of the remote controller to work (Please refer to the
product label for the voltage range and related parameters).
4. Please take out the batteries if you will not use this product for a long time.
16
Publicidad
