OPERATION
Follow the instructions below to use the unit.
1.
Switch on the unit as soon as you have fully assembled it. Allow the unit to
warm up for a few seconds and make sure it is in good condition.
2.
It is recommended to use fresh fruits, which are rich in water and nutrients.
3.
Wash and cut the fruit into pieces that will fit through the tube.
4.
Remove seeds and hard pips from the fruit.
5.
Put the food into the tube and press it down carefully with the pusher.
Proceed as follows if the appliance is stopped during juicing:
1.
If you have used the appliance for more than 10 minutes, switch off the
appliance and let it cool down for 5 minutes before using it again.
2.
The unit may be clogged. Press and hold the "R" button for 2-5 seconds to
push the fruit upwards. Press the "ON" button to continue juicing.
Notes:
•
To avoid damage to the auger and the micro mesh filter, do not force the fruit
down during juicing.
•
This appliance is not suitable for juicing grains or sugar cane.
•
Do not use the appliance for more than 15 minutes at a time.
EN
15