Starting Up The Unit - Bergstrom DAF COOL ULTIMATE Manual Del Usuario

DAF COOL ULTIMATE
The unit will automatically recognise the remote control when it is switched on, without
the need for any additional operations.
For perfect operation of the remote control it must be pointed directly at the signal
receiver located on the unit's control panel.

Starting up the unit

To switch on DAF Cool Ultimate press the On/off key on the control panel
the unit's remote control. DAF Cool Ultimate will always start with the AUTO automatic
operating mode selected and with the factory settings.
Selecting operating modes
To change the unit's operating modes, press the MODE button on the control panel or
remote control until the desired option is reached. While this operation is being carried
out, the different options will be lit up in blue, and when the desired option is reached, it
will be lit up in white after a few seconds. Once an operating mode has been selected,
the intensity of the display will decrease after 10 seconds of inactivity until it switches
off after another 60 seconds of inactivity, with only the ON/OFF button
up in white.
AUTO - automatic operating mode
When selecting the AUTO operating mode, the unit's display will show the value of the
last comfort temperature selected, allowing the user to change it in a range between 15
ºC and 27 ºC using the selectors
regulate and control the comfort temperature by acting on the speeds of the centrifugal
blower and compressors.
MANUAL - manual operating mode
By selecting the MANUAL operating mode, the user can choose between 5 levels
of cooling capacity for uninterrupted operation. The comfort temperature will not be
controlled automatically, meaning the unit will remain at the selected power until the
user switches it off, sets another power or changes the operating mode.
. With this function, the unit will automatically
13
EN
or on
remaining lit