Specifications; Measurements; Starting Operation; Preparation - Chicago Pneumatic CP9302 Instrucciones De Manejo/Instrucciones De Seguridad

1-

Specifications

CP9302 CP9306
Capacity 2
[t]
A [mm] 160
B [mm] 100
C [mm] 58
D [mm] 260
E [mm] 90
F [mm] 93
G [mm] 23
Weight 2,3
[kg]

Measurements

1.1-

Starting operation

2-

2.1- Preparation

First, remove the wrapping of the hydraulic jack and check whether the unit was damaged during its transport or whether there
are any missing parts. The wrapping material must be disposed of in accordance with the national environmental protection
laws.

2.2- Using the jack

Before using the jack for the first time, its hydraulic circuit must be bled. Insert one end of the pump lever with both notches onto
the valve screw, and turn the lever counter-clockwise (open). Then, pump several times. Turn the valve screw clockwise until it
is completely closed; the jack is ready to be used.
3- Maintenance
•
The movable part must be greased regularly.
•
Always keep the jack clean; keep it away from harsh chemicals/environments.
•
When changing or re-filling the oil, fill the tank up to the filling plug.
•
Visual checks (in the area of the welding seams) must be carried out regularly.
ATTENTION: Too much oil can stop the jack operation.
Only use oil of type HPLD 22. Never use brake fluid.
Liter
CP9312 CP9316
6 12 16
200 245 250
134 175 175
79 80 80
333 420 426
115 138 145
112 144 160
32 48 53
4,4 8,5 10,4
CP9302 CP9306
0,05 0,15
CP9320
20
250
175
80
505
156
161
53
11
Amount of oil
CP9312 CP9316
0,3 0,38
- 7 -
CP9320
0,47