Hach TenSette plus Manual Básico Del Usuario página 8

Option Description
Program Select the program number from 1 to 9. Default volumes: 0.2, 0.4, 0.5, 1.0, 1.3, 2.0,
2.3, 2.5, 5.0 mL
Options Calibrate: Calibration mode. Select between:
• Two points: two points calibration.
• One point: one point calibration.
• Counter: Displays number of pipettings since last calibration.
Service: The piston can be disconnected and reconnected in Service mode. Refer to
Maintenance
Name: This function enables user to set a name for the pipette. The name is always
shown on the display when the pipette is in sleep mode. To change the default
name:
1. Choose Name from the menu and select Edit. The first digit starts to flash.
2. Change the digit with the scroll key. Move to the next digit with OK. When the last
digit is accepted the name is changed.
Power: With this function the power can be turned off. Pressing any key turns on the
power.
Buzzer: The buzzer can be turned on and off with this function.
Version: The software version is displayed.
Backlight: Turn on/off the backlight.
Figure 3 Pipette operation
1 Speed indicator
2 Battery indicator
3 Volume indicator
Section 7 Operation
Chemical exposure hazard. Obey laboratory safety procedures and wear all of the
personal protective equipment appropriate to the chemicals that are handled. Refer to
the current safety data sheets (MSDS/SDS) for safety protocols.
8 English
on page 9.
4 Function
5 Speed-in/-out
6 Right Selection Key
W A R N I N G
7 Scroll Key
8 Tip Ejector Lever
9 Left Selection Key