Low Impedance - FONESTAR PROX-15 Manual De Usuario

EN
CONNECTION
- IMPORTANT: it is important that the amplifier is properly cooled, so make sure that the place where it is
installed has access to air flow and that the chassis slots are free of obstacles.
- With the amplifier switched off, connect all audio sources AUX, MIC, EMERG. INPUT. If you are going to
use the FM tuner it is recommended to connect an FM receiving antenna.
- Connect the speakers to the corresponding low impedance output (4 Ω + COM) or 100 V line (100 V + COM).
- Check that the volume and gain controls are set to minimum, connect the amplifier to the power supply.
- Turn on the amplifier and select the input on the front.
- Finally, adjust all volume and gain controls, and equalisation (BASS and TREBLE).
100 V LINE

LOW IMPEDANCE

R GAIN
R GAIN
BASS
L VOX
BASS
L VOX
EMERGENCY
EMERGENCY
R GAIN
R GAIN
BASS
L VOX
BASS
L VOX
EMERGENCY
EMERGENCY
TREBLE
TREBLE
TREBLE
TREBLE
- 4 -
POWER CONSUMPTION: 50 W
POWER CONSUMPTION: 50 W
+ –
230 V AC, 50/60 Hz FUSE: T1 A
115 V AC, 50/60 Hz FUSE: T1 A
+ –
230 V AC, 50/60 Hz FUSE: T1 A
115 V AC, 50/60 Hz FUSE: T1 A
230 V AC
230 V AC
MAX 15 W@100 V
MAX 15 W@100 V
POWER CONSUMPTION: 50 W
POWER CONSUMPTION: 50 W
+ –
230 V AC, 50/60 Hz FUSE: T1 A
115 V AC, 50/60 Hz FUSE: T1 A
+ –
230 V AC, 50/60 Hz FUSE: T1 A
115 V AC, 50/60 Hz FUSE: T1 A
230 V AC
230 V AC
MIN 15 W@4
MIN 15 W@4