GB
Before use
Please read these instructions carefully.
They will give you important information on
the installation, operation and maintenance
of the appliance.
If you throw out an old appliance, it is
important to destroy the locking mechanism
(not all models).
Damaged appliances must not be con-
nected to the mains. If doubts, ask your
supplier.
Placing
It is best to place the appliance in a dry
room with good air circulation. The room
temperature should be as low as possible
(energy-saving), but not lower than +5°C.
When placing the appliance, it must not
be exposed to direct sunlight or placed up
against a heat source.
The appliance must be placed on an even,
horizontal and stable surface.
Cleaning
Before beginning cleaning, switch off main
power at the wall socket. Clean the ap-
pliance with a mild soap solution. Use a
wrung-out cloth or sponge. Always dry off
with a clean, dry cloth. Warning: Never
use cleaning agents con-taining abrasive
substances.
Starting
Before using the appliance, it is advisable to
wash down the inside with lukewarm water
and a mild detergent, and then to dry it off
thoroughly.
The temperature in the appliance will de-
pend on:
● The temperature in the room.
● The frequency and duration of periods
when the lid is open.
● The amount of goods.
It may therefore be necessary to change
the thermostat setting from time to time.
The outer mantle may get warm, but the
temperature will get lower when the goods
have attained the wanted temperature.
Climate class
SN
N
ST
T
6
Optimum room
temperature
+10 ºC to +32 ºC
+16 ºC to +32 ºC
+16 ºC to +38 ºC
+16 ºC to +43 ºC