Faber HEAVEN GLASS LIGHT WH FLAT KL A90 Manual De Uso página 6

4. CONTROLS
L
Key Key press
L Short
Long press with
light or motor on
Long press with
all loads off (mo-
tor and lights)
Short
T1
Long press with
light on
Long press with
all loads off (mo-
tor and lights)
T2 Short
Long press with
light or motor on
6
T1
Function
The lights alternate between high intensity, medium intensity (if
present), off.
If there is an induction cooktop coupled with the hood and the hood is
off, as soon as the induction cooktop is turned on, the hood lights
automatically turn on at the maximum intensity.
Delay Function
Activates/Deactivates the Delay function (automatic shutdown of the
Motor and of the lighting delayed by 30').
Cannot be activated with Intensive or 24h function.
K-Link coupling
Before starting the procedure follow the specific instructions of the
manuals of the devices to be coupled.
Starts the pairing procedure between the hood and compatible K-Link
devices (induction cooktop or remote control). Up to 3 induction cook-
tops can be paired and only one remote control. See the manual of
the devices for details of the operations that need to be performed on
these.
The coupling procedure takes 2 minutes. If no devices are recognised
within this time check that you have previously activated the proced-
ure for the devices to be coupled. The maximum number of linkable
devices may have been reached.
Turns the motor on/off at the first speed.
Activates/Deactivates the Activated Carbon Filters alarm.
K-Link uncoupling
Starts the procedure for the cancellation of all compatible K-Link
devices previously coupled with the K-Link coupling function.
Turns the motor on/off at the second speed.
24h Function
Activates/Deactivates the motor in the 24h Air Exchange mode, a
speed that allows suction of 10 minutes every hour, for a 24-hour
cycle.
Cannot be activated if the Intensive or Delay modes are active.
T2 T3
S1
T4
LED
-
Flashes
LEDs T1 and T2 flash-
ing:
coupling in progress.
Upon successful com-
pletion of the procedure
LEDs T1 and T2 will
light up for 2 seconds.
Fixed
All LEDs flash twice:
alarm activated.
All LEDs lit for 1
second:
alarm deactivated.
Upon successful com-
pletion of the procedure
LEDs T1 and T2 flash 5
times.
Fixed
Flashes