Proposition 65; Operation; Check Battery Capacity; Technical Data - GreenWorks Pro LB602 Manual Del Operador

5

PROPOSITION 65

WARNING
This product contains a chemical known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some dust created by power
sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and other
masonry products;
• Arsenic and chromium from chemically treated
lumber.
Your risk of exposure to these chemicals varies
depending on how often you do this type of work. To
reduce your exposure to these chemicals, work in a
well-ventilated area, and work with approved safety
equipment, such as dust masks that are specially
designed to filter out microscopic particles.
6

OPERATION

6.1

CHECK BATTERY CAPACITY

Press the battery capacity indicator (BCI) button. The
lights will illuminate according to the batteries capacity
level. See chart below:
2
Lights Capacity
4 Green Lights The battery is above 80% capacity
The battery is between 80% and
3 Green Lights
60% capacity.
The battery is between 60% and
2 Green Lights
40% capacity.
The battery is between 40% and
1 Green Light
20% capacity.
The battery is less than 20% ca-
Lights go out pacity and requires charging imme-
diately.
1. BATTERY CAPACITY INDICATOR (BCI) BUT-
*
TON
2. LIGHT METRE
BATTERY PROTECTION FEATURES
English
This lithium-ion battery packs are designed with
features that protect the lithium-ion cells and maximize
battery life.
If the tool stops during use, release the trigger to reset
and resume operation. If the tool still does not work, the
battery needs to be recharged.
COLD WEATHER OPERATION
The lithium-ion battery pack can be used in
temperatures down to -14°C (6.8°F). Put the battery
pack on a tool and use the tool in a light duty
application. After about a minute, the pack will warm up
and begin operating normally.
7
Model
Battery
Voltage per cell
Cell number
Charger time
Model
Battery
Voltage per cell
Cell number
Charger time
1
Model
Battery
Voltage per cell
Cell number
Charger time
Model
Battery
Voltage per cell
Cell number
Charger time
Model
5

TECHNICAL DATA

LB602
54V DC 2.0.Ah, 108Wh, 60V Max
3.6 V
15
60 min. (use CAC801 Charger)
60 min. (use CH60A00 Charger)
LB6025
54V DC 2.5.Ah, 135Wh, 60V Max
3.6 V
15
75 min. (use CAC801 Charger)
75 min. (use CH60A00 Charger)
LB603
54V DC 3.0.Ah, 162Wh, 60V Max
3.6 V
15
90 min. (use CAC801 Charger)
90 min. (use CH60A00 Charger)
LB604
54V DC 4.0.Ah, 216Wh, 60V Max
3.6 V
30
120 min. (use CAC801 Charger)
120 min. (use CH60A00 Charger)
LB605
EN