Original Installation Packages For Your Cinderella Toilet - Cinderella CLASSIC Manual Del Producto

2.3 ORIGINAL INSTALLATION PACKAGES FOR YOUR CINDERELLA TOILET

Cinderella Original Installation Kit: We strongly recommend the use of the "Cinderella Original Installation Kit"
when installing you appliance. This complete set includes necessary parts for an ideal installation, optimizing
the incinerating process and functionality of your toilet. The installation kit includes two separate boxes. Box
no. 1 includes 7 x 110mm UV stabilized PP quality pipes - for installing the inlet and outlet ventilation. Box no.
2 includes an optimized flue cowl and elbow, for increasing the system flow rate and incineration efficiency. It
contains a storm collar for the inlet air, as well as pipes and clamps to support the installation of the pipes.
1
2
CINDERELLA ORIGINAL INSTALLATION KIT QTY
1 Male-Female 1066 mm flue pipe
Male-Male 500 mm flue pipe
2
NOTE!
• This manual will further explain and demonstrate how to optimally install your toilet,
based on the parts included in the Original Cinderella Installation Kit. Should you desire
to install your Cinderella appliance with other than our original pipes and parts, be sure
that they comply with the specifications described under section 2.4.1 "parts and
material specifications".
• In order to guarantee your Cinderella Incineration Toilet functions properly, It is
essential to ensure proper ventilation in accordance with the guidelines in this
manual. Installations deviating from the manufacture specifications or the use of
non-authorized parts in the installation of the appliance will cause malfunction, wear
or odors and will void the warranty.
5
4
CINDERELLA ORIGINAL INSTALLATION KIT QTY
5 Ari vent 160 mm (201 cm²)
1
2 Wall mount rod
2
3 Support clamp
4 Elbow 87 w/drain
5 Flue Terminal Cap
6 Threaded rod 30 mm
1
6
2
3
1
3
3
1
1
3
7