allen+roth 67692W-6104 Instrucciones De Montaje página 5

POP-UP DRAIN INSTRUCTIONS
1. Remove the bottom gasket (1) and nut (2) from the
top gasket (3) and pop-up body (4). Attach these
pieces together by pushing the bottom gasket (1)
down into the top of the nut (2) and twisting
together.
2. Insert the pop-up body (1) into the sink. Ensure that
the top gasket (2) rests securely between the top of
the sink and the top of the pop-up body (1). From
underneath the sink, screw the bottom gasket (3)
and nut (4) assembly onto the pop-up body (1) by
twisting clockwise until secure.
OPERATION INSTRUCTIONS
1. Flushing and checking for leaks
IMPORTANT: After installation is complete, remove
the aerator (1) with a coin (2) to flush the water lines.
Turn on the water supply and allow both hot and cold
water to run for at least one minute each. This flushes
away any debris that could cause damage to internal
parts. While the water is running, check for leaks.
Turn off the water and replace the aerator.
1
2
2
3
4
1
1
2
5
3
4
1
2
1
1
2