Mounting; Orientation; Mounting Points - Chauvet Professional F4 Manual Del Usuario

Mounting

4. Mounting

Orientation

Mounting Points

8
Each F4 is constructed of aluminum die-cast. This ensures each panel is stable and
easy to install. Each panel also has a convenient built-in handle located on the top,
backside of the panel along with an alignment nipple on the top. This combination
enables you to easily pick up and securely hold each panel while mounting and working
with the panels.
The F4 can be assembled to provide any number of modular designs. The panels on the
top can be securely hung from a truss or other stable surface. Always hang in a safe
position with adequate space for ventilation, configuration, and maintenance.
Chauvet recommends following the general guidelines below.
· When selecting an installation location, consider ease of access for operation and
routine maintenance.
· Make sure to hang away from any flammable material, as indicated in the
Notes section.
· Never mount in places where rain, extreme temperature changes, or restricted
ventilation may affect it.
· Make sure that the structure and attachment points to which you are hanging the
panels can support the weight.
· Make sure that all load-bearing hardware used can support the weight.
· See the
Technical Specifications
1 2
2
2
1
3
1. Threaded Mounting
Holes Size M12 (4x)
for the weight requirement of each F4.
2
3
2. Male Speego
Connection
Safety
2 1
3
3
1
3
3. Female Speego
Connection
F4 User Manual, Rev. 2