Music and alarm sounds
•
To choose the music, press the music button (11) to scroll through the different songs
available.
•
01, 02 and 03 appear on the LED display for 3 seconds to indicate which song is set (the
same song is used for the alarm).
•
Turn the rear knob (8) clockwise to increase the music volume from 10% (minimum) up
to 100% (the same volume setting is also used for the alarm)
•
The music keeps playing until the user long presses the music button for more than 2
seconds.
•
The alarm volume will increase for 30 seconds until it reaches the volume set by the user
via the volume control.
Lighting
•
Put the right movable ear (4) in the tilted position to switch on the lighting.
•
Put the right movable ear in the upright position to turn off the light.
•
When the lighting is on, briefly press the + or - buttons on the arms to increase or reduce
the brightness: 10% - 50% - 100%
Display dimmer
•
When NO music is playing and NO lights are on, the arms default to the clock display
dimmer.
•
Short press the + button on the right arm to increase the brightness and the - button on
the left arm to reduce the brightness.
•
Brightness can be set to: Off - 10% - 30% - 100%.
Technical specifications
Type
Loudspeaker
Power
consumption
Speaker
impedance
Adapter specifications
Power supply
Output
Cable length
In an environment with electrostatic discharges, the device may turn off (the unit may
not work properly). The user should therefore restart the appliance by switching it on
to select the suitable mode and set the time again.
Specifications
0.5 W
1.6 W (light on)
0.4 W (light off)
8Ω
100-240V~50/60Hz 0.6A Max
‗
5V
1 A Max
About 1.5 m
Type
RMS power
Power supply
Speaker
- EN 14 -
Specifications
5 W
DC 5V, 1A
Loudspeaker Ø 40 mm,
8 Ohms