TECO SEACHILL TK 3000 Manual De Instrucciones página 12

Ocultar thumbs Ver también para SEACHILL TK 3000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
TANK
1.5.3 Information on the display
"Green light"
On:
"Red light"
On:
"Green light"
Flashing light:
"Red light"
Flashing light:
1.5.4 Thermostat settings
Refer to fi gure 15 for buttons detection.
1) To change the temperature of the water:
a. Press the SET key, the value currently set is displayed. The value starts blinking
b. Change the value by using the
c. Press the SET key to confi rm the set value or wait 5 seconds, the value is stored
2) Changing the hysteresis value of operation
a. Press for 10 seconds the SET key
b. On the display will appear the hysteresis value currently set. The value will start blinking. It is advis-
able not to change this value
c. Change the value by using the
d. Press the SET key to confi rm the set value or wait 5 seconds, the value is stored
3) Adjustment of the temperature viewed on the display
In the event that the temperature viewed on the display is diff erent than that taken inside the aquarium,
proceed as follows:
a. Press for 10 seconds the SET key
b. On the display will appear the hysteresis value currently set. The value will start blinking
c. Press once again the SET key
d. On the display will appear the value of the temperature currently read by the probe. The value will
start blinking
e. Change the value by using the
f.
Press the SET key to confi rm the set value or by waiting 5 seconds, the value is stored
4) Change of the unit of measurement of the temperature viewed on the display
a. Press simultaneously the
b. On the display will appear the writing C - F (from Celsius degrees to Fahrenheit degrees) or F - C
(from Fahrenheit degrees to Celsius degrees). The temperature will be displayed with the new unit
of measurement
1.6 TRANSPORTATION AND STORAGE
The conditioner must be handled carefully in a vertical position using the handles. It is recommended to
placed it on a fl at surface.
1.7 DEMOLITION AND DISPOSAL
The crossed-out wheelie bin label that can be found on your products, indicates that the product may
not be treated as household waste. By ensuring that this product is disposed of correctly, you will
help preventing potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of these products. For more detailed
information about recycling of this product, please contact your local city offi ce, your household waste dis-
posal or the dealer where you purchased this product. This information only applies to customers in the
European Union, according to Directive of EUROPEAN PARLIAMENT on waste electrical and electronic
equipment (WEEE) and legislation transposing and implementing it info the various notional legal systems.
For other countries, please contact your local government to investigate the possibility of recycling your
product.
10
C H I L L E R L I N E
unit in cooling mode
unit in heating mode
unit ready for cooling
unit ready for heating
and
keys
and
keys
and
keys
and
keys
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Seachill tk 6000Seachill tk 9000

Tabla de contenido