Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
USE
Cooling Mode
In this mode, the exhaust hose must be connected to the outside of the home.
1 - Press the
button on the control panel or the
2 - Press the
button on the control panel several times to turn on the "Cool" indicator or press the
remote control
3 - Adjust the setpoint temperature (desired temperature) using buttons
4 - Press the
button on the control panel several times or press the
to "Hi" (high speed), "Lo" (low speed) or "Auto" (speed adapted automatically)
Simultaneously press the
to change the temperature display unit between °C (Degrees Celsius) and °F ( Degrees Fahrenheit)
Fan mode
1 - Press the
button on the control panel or the
2 - Press button
on the control panel several times to turn on the "Fan" indicator or press button
control
3 - Press button
on the control panel several times or press button
(high speed) or "Lo" (low speed)
The "Auto" speed and the temperature setting are not available in Ventilation mode.
Dehumidifi cation mode (Dry)
In this mode, the continuous drainage pipe must be connected to drain the water into a container or to the sewage system.
1 - Press the
button on the control panel or the
2 - Press button
on the control panel several times to turn on the "Dry" indicator or press button
control
Fan speed and temperature adjustment are not available in Dehumidifi cation mode.
Automatic Mode (Auto)
In this mode, the device automatically determines the settings necessary to reach the set temperature.
1 - Press the
button on the control panel or the
2 - Press button
on the control panel several times to turn on the "Auto" indicator or press button
control
3 - Adjust the setpoint temperature (desired temperature) using buttons
Timer
The timer is used to start or stop the device after a time set between 0.5 h (30 min) and 24 h
• Switch on the appliance with the timer
1 - Switch on the appliance, choose the operating mode (Cool, Dry, Fan) and adjust the setpoint temperature and fan speed
2 - Press the
button on the control panel or the
TIMER
3 - Press the
button on the remote control
4 - Set the time until the desired switch-on time using keys
ON/OFF
button on the remote control to turn on the device
and
buttons on the control panel for 3 seconds, or press the
ON/OFF
button on the remote control to turn on the device
ON/OFF
button on the remote control to turn on the device
ON/OFF
button on the remote control to turn on the device
ON/OFF
button on the remote control to turn off the device
and
.
SPEED
button on the remote control to set the fan speed
SPEED
on the remote control to set the fan speed to "Hi"
and
.
and
(in number of hours)
COOL
button on the
°C/°F
button on the remote control
on the remote
FAN
on the remote
DRY
AUTO
on the remote
FR
ES
PT
IT
EL
PL
UA
RO
EN
45
Publicidad
Tabla de contenido
Solución de problemas
