Safety Instructions - Uniteck UNIFIX 20 Manual De Instrucciones

EN
UNIFIX 20
PANEL COMPATABILITY
With the design based on the use of Oblong drilling, Unifix can be used with different kind of panels on the
market.
Unifix 20 is ment to fix 1 panel only, with the spacings and dimensions of panels as indicated below.
Support
L
Unifix 20 550
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with
the panel:
Support
Unifix 20 = 1,4 kg
Fastening: to prevent large quantities of snow from accumulating behind the sensor, install appropriate
barrier grids.
The position of the solar panel influences your electrical production. Choose the most optimal inclination
and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow (eg
tree)

SAFETY INSTRUCTIONS

• Take the appropriate mesures to prevent accidents during your mounting steps.
• If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk
of getting burnt. Make sure to protect yourself accordingly.
• When finished, check and ensure that all of your brackets and panels are fixed properly.
10
H (e)
Centre distance and panel dimensions
Dim
Number of
panels
H
x 3
x1 x 2
50 ●
Unisun 10.12M / 20.12M / 20.24M
L (p)
L (e)
Spacers for fastening
of each panel
(in mm)
L (e) H (e)
80 > 505 100 > 300
Panel
www.uniteck.fr
H (p)
Panel Dimension
Max
L (p)hh H (p)
400
No max
=1.8kg / 2.6kg / 2.6kg
Total
weight
Of panels
(In Kg)
3