Uline RUBBERMAID H-1210 Manual Del Usuario página 3

LOCK AND KEY ASSEMBLY
1. Remove key and nut from lock assembly and reserve.
2. Drill hole through stationary collar using circle
molded in plastic as a guide. (See Figure 6)
Figure 6
PAGE 3 OF 9
ASSEMBLY CONTINUED
Drill Hole Here
1-800-295-5510
uline.com
3. Insert front of lock through the back of the hole
drilled in stationary collar. (See Figure 7)
Figure 7
4. Attach nut to back of lock and tighten.
5. Use key to lock assembly. Remove key from lock.
Stationary
Collar
0321 IH-1210