USER GUIDE
OVERVIEW
GENERAL INFORMATION
The drawers, baskets and shelves should be kept
in their current position unless otherwise specified
in this quick guide� The light system inside the
refrigerator compartment uses LEDs light, allowing a
better lighting than traditional light bulbs as well as a
very low energy consumption�
CONTROL PANEL
1
SETTING THE TEMPERATURES
Press the Refrigerator Button
temperature in the refrigerator compartment�
Recommended setting for Refrigerator compartment is
MED
Press the Freezer Button
temperature in the freezer compartment�
Recommended setting for Freezer compartment is MED
LEAST COLD
MEDIUM
COOLEST TEMP
FAST FREEZING
Led off
Led on
To avoid an increase of food waste, refer to recommended
setting and Storage Time in OPERATION chapter
8
4
2
3
to set a different
to set a different
DISPOSAL
Doors and lids of the refrigeration appliance should
be removed before disposal in the landfill, to avoid
children or animals getting trapped inside�
6
5
ON/STAND-BY
Press the Refrigerator Temperature
3 seconds to turn the appliance on stand-by�
When in Stand-by mode the light in the refrigerator
compartment does not turn on� Press the button
again briefly to reactivate the appliance�
FAST FREEZE FUNCTION
In order to preserve at best, please use the Fast Freeze
function before putting a large quantity of food in the
freezer cavity�
Press the button (6) until all the three leds are on in
order to set the function�
The function turns off automatically after 26 hours, or
manually by selecting different freezer temperature�
Note: Please avoid a direct contact between the fresh food
and the food already frozen. To optimise the freezing speed,
drawers can be removed and the food can be placed directly
on the bottom of the compartment.
1.
Refrigerator Temperature / Stand By
2.
Temperature Indicator setting
3.
Refrigerator Indicator
4.
Alarm Indicator
5.
Freezer Indicator
6.
Freezer Temperature / Stop Alarm
button for