VONROC LM504DC Traducción Del Manual Original página 12

EN
CD802AA Quick charger
CD820AA Dual quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN60335; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-6.
1. Upper handle
2. On/off switch
3. Safety button
4. Power cable
5. Machine
6. Cable holder
7. Carrying handle
8. Wheel
9. Wheel cover
10. Grass box basket
11. Grass box lid
12. Grass box cover
13. Grass level indicator
14. Lower handle
15A. Handle adjustment knob
15B. Bolt for knob
16. Grass box carrying handle
17. Height adjustment lever
18. Grass outlet
19. Battery compartment cover
20. Battery bay
12
21. Safety key (isolator switch)
22. Battery unlock button
23. Battery
24. Battery LED indicators button
25. Battery LED indicators
26. Charger
27. Charger LED indicators
28. Blade
29. Blade bolt
30. Charger
31. Green LED indicators
32. Amber LED indicators
33. Red LED indicators
3. ASSEMBLY
Before any work on the power tool, remove
the battery.
The battery must be charged before first
use.
Warning: Use only batteries which are
charged to the same level. Never combine
full and half-full batteries. Always charge
the two batteries simultaneously. The
equipment's operating time depends on the
battery with the lower charge level. The two
batteries must always be fully charged
before use.
Inserting the battery into the machine (Fig. A, J)
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine. Close the battery cover
before use.
1. Open the battery compartment cover (19).
2. Insert the battery (23) into the battery bay (20)
as shown in Fig. J.
3. Push the battery further forward until it clicks
into place.
4. Repeat for the other battery (23).
5. Close the battery compartment cover (19).
Removing the battery from the machine (Fig. A, J)
1. Open the battery compartment cover (19).
2. Pull the battery (23) out of the battery bay (20)
as shown in Fig. J.
3. Repeat for the other battery (23).
WWW.VONROC.COM