Dale Tiffany TT100914 Instrucciones De Asamblea

ASSEMBLY INSTRUCTIONS
Item No: TT100914
1. Carefully unpack and layout the parts as shown in
the illustration.
2. Screw threaded rod (D) into cluster connection (C)
(using finger pressure only) until it sits firmly in cluster (A).
3. Slide spacer (E) over threaded rod (D).
4. Place lock washer (F) over threaded rod (D).
5. Screw hex nut (G) onto threaded rod (D).
6. Screw knurl nut (H) on threaded rod (D) down to
hex nut (G). This can be used to raise the shade a
little if necessary.
7. Place the shade (I) over the end of the threaded rod (D)
and screw the finial (J) onto the rod to hold the shade in place.
8. Insert 60W Bulbs into bulb sockets.
Uses (2) Maximum 60WATT, Type "A" Bulbs
(Bulbs not included)
Cleaning of your lamp
Unplug lamp, wipe with damp cloth.
Do not use abrasives.
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
Revision – 10/16/12