Feiss Estes 3 Guia De Inicio Rapido

Installation Instructions for
Estes 3 Light Outdoor Post
Outdoor
G ENERAL RODUCT NFORMATION P
This product is safety listed for wet locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1A
Connect the fixture to a suitable ground in accordance to local electrical codes.
1
Connect the white fixture wire to the neutral power line wire with a wire nut.
2
Connect the black fixture wire to the hot power line wire with a wire nut.
3
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
4
Install the candle follower by placing it on top of the candle tube. Repeat for remaining candle followers.
5
Screw the lamp into the sockets. Refer to the label on the lamp socket for Max Wattage information.
6
Install the glass panels by sliding them into the fixture and secure them using the brackets and cap nuts.
7
Place the cover onto the fixture and secure it using the cover screws.
8
I :
COVER
GLASS PANEL
COVER SCREW
8
FIXTURE
POST SCREW
3
POST
CAUTION RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
CAP NUT
7 7
BRACKET
8
6
LAMP
CANDLE FOLLOWER
5
CANDLE TUBE
4 4
2
1
OL11909
-
OL11909
1.0