How To Assemble - Lionelo Otto Manual Del Usuario

Warnings related to batteries and feeder cable
• Keep batteries out of reach of children.
• Insert batteries in the compartment in accordance with marking.
• Do not throw batteries into fire as they may explode.
• If you do not use the product for a long time, please remove a battery from
the compartment.
• Always remove a worn-out battery, otherwise it may leak or explode and
damage the product.
• Do not charge single-use batteries.
• Do not mix batteries - old with new ones, or alkaline with standard or multiple-
charge batteries.
• Dispose of batteries in accordance with regulations, throw them into special
containers.
• Check the feeder cable for potential damage to the cable, plug, contacts and
other elements. If you detect any irregularities, do not use the feeder cable
anymore.
• When using the product, use the feeder cable of suitable parameters and
recommended by the manufacturer (supplied).
• To make sure the product works, you need 4 LR14 batteries (not supplied)
or feeder cable (not supplied). The feeder cable parameters required: input:
100-240V ~ 50/60Hz 0.3A, output: 5V
Description (fig. 1)
1.
Product frames
2.
Seat fabric covering
3.
Bow
4.
Cushion
5.
Seat frames
6.
Cushion fastening
7.
USB cable

How to assemble

1.
Unfold the legs of the baby swing so that they are stable on the flat surface.
2.
Put the sound module on the frame of the baby swing, as showed in the figure
no. 2. The assembly is successful if you can hear a „click".
EN
1000mA.
‑ 6 ‑