How To Use - Srhythm NiceComfort 85 Manual Del Usuario

How to Use

Use ANC Function
To turn on ANC, press the ANC Button when Bluetooth
turned on; Long press 3 seconds the ANC Button when
Bluetooth turned off ;
ANC
(the LED indicator light will be green when ANC ON)
To turn off ANC, press the ANC Button;
(the LED indicator light green color will be off when
ANC OFF)
Use Transparency Function
Press the ANC button to switch between ANC mode,
ANC
Normal mode and Transparency mode.
Use Bluetooth Function
1.Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth on,then enter pairing
mode.(the LED indicator light will be blue and red
flashing quickly.)
2.Start your mobile phone Bluetooth and find
headphone Bluetooth pairing name "Srhythm NC85" to
click it to pair.(the LED indicator light will be blue
flashing slowly after pairing successfully.)
3-5S
3.Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth off.
Note: If NC85 is not paired with any devices within 5
minutes after Bluetooth turned on, it will automatically
shut down to save power .
Press to adjust volume. Long press to skip to
next/previous song.
Press the Multi-function Button to play/pause music
or answer/end call.
Double-press the Multi-function Button to reject an
incoming call.
2
Press the Multi-function Button 3 times to activate
voice dialingfunction.
3
5
Function Details
Easy Pairing
1. Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth on,then enter
pairing mode.(the LED indicator light will be blue and
red flashing quickly.)
2. Keep headphone and your mobile phone as close
as possible during pairing process.
3. Turn on your mobile phone Bluetooth. Search for
headphone Bluetooth signal on mobile phone and
click "Srhythm NC85" to pair.(the LED indicator
light will be blue flashing slowly after pairing
successfully.)
4. If you are asked for a password/PIN code during
pairing procedure,please enter "0000" (four zeros).
Pair to the Second Bluetooth Device
Step 1:Pair NC85 with First device via Bluetooth
successfully and then turn off the First device's
Bluetooth.
Step 2:Pair NC85 with the Second device via
Bluetooth.
Step 3: Turn on Bluetooth of the first device and pair it
with headphone again.
Now both of your devices are paired with NC85 for
easy switching.
6