The animals are repelled by the frequencies – now also possible for
friends of nature!
Technical data
Battery-operated:
Effective range:
Output frequency:
Displays:
Replacement of the battery
1. Remove the housing cover on the upper side unscrew the 6 screws
carefully.
2. Remove the old battery from its fitting.
3. Insert 6 new batteries size micro cell (AAA). When doing so, mind the
correct polarity as shown on the bottom inside the battery fitting.
4. Reattach the casing cover to the casing body with a audible click into
place and screw it by hand carefully.
General information
1. Electric appliances, packaging material etc. should be kept away
from children.
2. Dispose packaging and worn out material correctly and in an
environmentally friendly way.
3. Do only pass on the device including the operation manual.
4. Subject to change of design and technical data without notice for the
sake of constant product improvement.
Safety instructions
Important: Damage caused by not adhering to the operating instructions
is not covered by guarantee. ISOTRONIC accepts no liability whatsoever
for any resulting consequent damages.
- Only operate the device at its intended voltage.
- In case of repairs, only use original spare parts, to avoid serious
6 x AAA (micro cells, not included)
approx. 50m²/540 sq.ft (in closed rooms)
or approximately 4m radius in the open air
periodic (3 seconds on and 27 seconds off)
23 – 50 kHz
LED indication (periodic)