Residual Risks; Transport And Delivery; Adjustment - Festool SSU 200 EB Manual De Instrucciones Original

ellery, bracelets, watches, etc., that may get
caught in the moving parts. For work in an open
area we recommend wearing rubber gloves
and work boots with anti-slip soles. If your hair
is long, protect it with a net.
- Use only those accessories or special equip-
ment that are offered for the machine by the
manufacturer.
- All repairs must be performed only by an au-
thorised service centre by properly qualifi ed
personnel, using original replacement parts.
The warranty does not cover any damages
caused by the use of any inappropriate parts.
5.3

Residual risks

Even if the machine is used to specifi cation and
all relevant safety regulations are followed, the
following residual safety risks may nonetheless
occur due to the design of the machine and its
usage:
- Injury from the cutting teeth when replacing
the chain.
- Injury from touching the chain on its cutting
area.
- Catching clothes in the moving chain.
- Injury from fl ying scraps or parts of the ma-
chine.
- Danger that may be caused by the portable cord.
- Kickback caused by the chain or the operating
the tip of the plate jamming.
- Concentration of sawdust jeopardising health
in poorly ventilated areas.
- Injury from touching electrically charged parts
when dismantling the machine or any part of it
while the machine is still plugged in.
- Hearing damage from prolonged work without
ear protectors.
5.4 Noise / Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the tool
are:
Sound pressure level:
Sound power level:
Acoustic output value measured according to es-
tablished guideline 2000/14/EC, appendix VI.
Measured sound power level
Uncertainty
Guaranteed sound power level
Evaluation methods for conformity in accordance
with Annex VI. Product category: 6.
26
Named body:
SLG Prüf- und Zertifi zierungs GmbH
Burgstädter Straße 20
09232 Hartmannsdorf
Germany
Operating noise
Damage to hearing
 Use ear protection!
The typical hand-arm vibration is
Uncertainty
The specifi ed emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary es-
– They represent the primary applications of the
Increase possible for other applications, with oth-
er insertion tools or if not maintained adequately.
Take note of idling and downtimes of machine!
6
The SSU 200 EB sword saw is delivered in perfect,
tested condition, packed in a plastic systainer. The
oil reservoir of the machine SSU 200 EB is not
fi lled. When the machine is delivered, take it di-
rectly out of the packaging and check for potential
damage during transport. Any damage caused
during transport must be reported to the carrier
immediately.
6.1
The packed sword saw can be stored in a dry stor-
age area without a heating, where the temperature
does not drop bellow −5 °C. Store the unpacked
saw only in a dry closed storage where the tem-
perature does not drop below +5 °C, and where
sudden temperature changes are prevented.
L = 91 dB(A)
7
PA
L = 102 dB(A)
WA
 All adjustments and settings must be carried
102 dB(A)
K = 3 dB
104 dB(A)
CAUTION
timates regarding vibration and noise loads
during operation.
power tool.

Transport and delivery

Storage

Adjustment

CAUTION
out before the machine is switched on.
a = 3 m/s
2
h
K = 2 m/s
2