Braun CareStyle Compact Pro IS2565BL Manual De Instrucciones página 10

Intended use
The appliance must be used only for ironing
garments which are suitable for ironing according
to the care label. Never iron or dampen garments
while wearing them.
(A) Filling the water tank
(for details refer to fi g. A)
Make sure the appliance is plugged off . You can
refi ll the water tank at any time during use.
This appliance has been designed to be used with
tap water. However, if you live in an area with hard
water, we recommend that you use either distilled
water or demineralized water to prolong the lifetime
of the appliance. Do not use condensation water
from a tumble dryer.
(B) Start into Operation
(for details refer to fi g. B)
Before starting to iron follow the garment care label
instructions carefully. Fabrics with this symbol
are not ironable.
For best ironing results, after ironing with steam,
perform the last strokes without steam.
Before First use
When steam is ready for the fi rst time we recom-
mend to iron for a few minutes over a rag to avoid
manufacturing residues can dirty your garments.
(C) Settings
(for details refer to fig. C)
iCare
The iCare mode is automatically chosen when the
appliance is plugged in.
It is suggested for garments like wool, polyester
and cotton/linen.
By pressing the mode button (1), the other 3
settings appear in the following order:
turbo + (max. steam)
It is suggested for garments that need more
powerful steam, like thick cotton/linen and jeans.
Vertical Refresh
Ideal for quickly refreshing both curtains and
hanging clothes. Fast and easy touch-ups even
without the ironing board.
Note: Each time you select the vertical refresh
mode, the pump produces some subtle rattling
noise. This is normal.
10
(for details refer to fi g. B)
+
eco
eco
It is suggested for most delicate garments like
synthetics, silk and blended fabrics. This mode
allows less power consumption.
(D) Iron Auto-Off
This function is activated if after 10 minutes there
has been no steam emission.
• When the iron is in the auto-off mode, the icon
related to the selected setting starts flashing.
• The iron will turn off to reduce power
consumption.
• To continue ironing, press the mode, clean or
steam button.
Before starting to iron again wait until the related
icon for the setting is permanently on.
(E) Descaling
(for details refer to fi g. E)
The system will remind you to descale it regularly
independent of the type of water used. Descaling
can be performed at any time needed even when
not indicated by the system.
If the clean LED (6) and the acoustic signal turn
on during an ironing session, it is possible to
continue ironing. There is no need to perform
the cleaning immediately. The cleaning procedure
can be performed when the ironing session has
been fi nished or next time the appliance is
switched on.
If the appliance is switched off without having
performed the cleaning process, the clean LED
and acoustic signal will turn on again when it is
next switched on. In case the steam emission
is deactivated the cleaning procedure must be
performed in order to proceed steam ironing.
Caution: Do not leave the appliance unattended
during the descaling process.
Always perform the descaling process with the
cleaning vessel (14). Do not interrupt the process
by lifting the iron up from the cleaning vessel, as hot
water and steam will come out of the soleplate.
Caution: The cleaning vessel can be hot and
contains hot water, take care while moving and
emptying it.
(F) Settings
(for details refer to fig. F)
Care & Cleaning
Before cleaning, always make sure that the
appliance is unplugged and has cooled down
completely.
(for details refer to fig. D)