Replacing The Fuse; Machine Disposal - espresso PRO 2+1 Manual De Uso

24 Manuale d'uso -

REPLACING THE FUSE

Warning
Before carrying out this operation, turn the machine off, unplug
it from the mains.
1. Take a screwdriver and insert it into the slot;
2. Press and turn the screwdriver to remove the internal fuse
carrier (A);
3. Replace the fuse and retighten the internal fuse carrier.
PROBLEMS
Should the machine not work or if other problems are detected,
make sure that:
a) The power cable connection is connected both to the wall plug.
b) The wall plug is powered.
c) The ON-OFF button is in the ON position.
d) The water tank is full.
e) The used capsule container is empty.
PRO 2+1
user's Manual - Mode d'eMploi - BedienungshandBuch - Manual de uso
A

MACHINE DISPOSAL

This product conforms with Italian Legislative Decree
no. 151/2005 and EU Directive 2002/96/EC.
The symbol on the appliance indicates that the
appliance, at the end of its operational life, must
be disposed of separately from other waste. The
appliance must be brought to an appropriate
EU 2002/96/EC
separate collection centre for electric and electronic
equipment set up by the local government, or, if not present, be
returned to the manufacturer or dealer without any cost to the
user. Appropriate separate collection contributes to the prevention
of possible negative effects on the environment and human health.
Therefore the user has the civil and moral responsibility of bringing
the appliance to the appropriate collection centre at the end of its
operational life.
The manufacturer will comply with his responsibility for the
individual recycling, treatment and environmentally compatible
disposal or participation in collective systems.