Weekly Cleaning - GGM gastro KMF2 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

6.2.

Weekly Cleaning

CLEANING OF THE GROUPS:
AUTOMATIC MODELS (CV MODELS)
These models feature an automatic cleaning
program.
1. Put the blind filter supplied with the
machine into a filter holder.
2. Add a spoonful of specific detergent for
coffee machines into the filter holder.
3. Insert the filter holder into the group that
you want to clean.
4. Simultaneously, press key 1 and 5 in order
to start the cleaning.
5. During the cleaning, the LEDs of both keys
blink.
6. When the cleaning is over, the LEDs stop to
blink. The machine automatically returns
into normal functioning mode.
7. Take out the filter holder.
 You can run the cleaning program on
several groups at the same time.
 In order to eliminate any unpleasant flavors after the cleaning, prepare a normal coffee.
CLEANING OF THE GRIDS AND TRAYS
Disconnect the machine from the electric mains supply before performing any kind of cleaning!
Let the machine cool down before performing any kind of cleaning!
Remove the plastic grids of the cup warming area and the metal grids of the tray under the groups.
Remove the tray under the groups.
Clean grids and tray with a humid cloth and a bit of specific detergent for coffee machines.
CLEANING OF THE DEPOSIT TANK
After extracting the tray under the groups, you have access to the machine's deposit tank. Clean the
tank and its drain with a brush. Make sure that the drain is not blocked by debris.
CLEANING OF THE MACHINE
Clean the machine's body with a humid soft cloth. Do not use abrasive or solvent detergents.
 Regularly (at least every two weeks) clean the water purifier, following the instructions supplied
with it.
SEMI-AUTOMATIC MODELS
1. Put the blind filter supplied with the machine
into a filter holder.
2. Add a spoonful of specific detergent for
coffee machines into the filter holder.
3. Insert the filter holder into the group that
you want to clean.
4. Press the switch button above the group you
want to clean in order to activate the group.
5. Press the switch button above the group in
order to stop the group.
6. Repeat this operation until the water that
comes out of the group is clear and shows no
signs of detergent.
7. Take out the blind filter and put a normal
filter into the filter holder. Insert the filter
holder into the group.
8. Let the group run 2-3 times in order to rinse
it.
Espresso Coffee Machine – Operating Manual
ENGLISH
25

Publicidad

Tabla de contenido
loading

Tabla de contenido