ASROCK Z690M PG Riptide/D5 Manual De Instrucciones página 22

Serial ATA3 Connectors
Right Angle:
(SATA3_0:
see p.1, No. 15) (Upper)
(SATA3_1:
see p.1, No. 15) (Lower)
(SATA3_2:
see p.1, No. 16) (Upper)
(SATA3_3:
see p.1, No. 16) (Lower)
USB 2.0 Header
(9-pin USB_0_1)
(see p.1, No. 20)
USB 3.2 Gen1 Header
(19-pin USB3_6_7)
(see p.1, No. 12)
Front Panel Type C USB
3.2 Gen1 Header
(20-pin F_USB3_TC_1)
(see p.1, No. 14)
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PB_SSRX+
IntA_PA_SSRX-
IntA_PA_SSRX+ GND
IntA_PB_SSTX-
GND
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
USB Type-C Cable
Z690M PG Riptide/D5
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
There is one header on this
motherboard. This USB
2.0 header can support
two ports.
There are two headers on
this motherboard. Each
USB 3.2 Gen1 header can
support two ports.
There is one Front
Panel Type C USB 3.2
Gen1 Header on this
motherboard. This header
is used for connecting a
USB 3.2 Gen1 module for
additional USB 3.2 Gen1
ports.
19