Cleaning And Sterilising - TensCare nouri pump Manual Del Usuario

Cleaning and Sterilising

Before using for the first time:
Clean and sanitise the parts before using your Nouri Pump for the first time.
Use the following cleaning and sanitising instructions.
After each use:
Clean all parts that come in contact with your breast and breast milk:
• Separate all parts, remembering to remove the pump valve from the
pump body.
• Rinse the parts in cool water to remove breast milk residue.
Washing in sink:
• Soak all parts in warm soapy water for 5 minutes and then clean with a
clean dish-cloth or soft brush.
• Rinse all parts with clear water.
• Allow parts to dry.
Washing in dishwasher:
• Wash all separated parts on the top rack of the dishwasher.
• Allow all parts to dry.
Sanitise daily:
• Wash hands thoroughly.
• Separate all parts that come in contact with your breast and breast milk,
remembering to remove the pump valve from the pump body.
• Immerse parts in boiling water for 10 minutes using a household pot.
• Allow water to cool before removing parts from the water.
• Place parts on a clean surface and/or towel and allow to dry.
Caution:
Only use drinking tap water or bottled water for cleaning.
Separate and wash all parts that come in contact with the breast and milk
immediately after use to avoid milk residue drying and to prevent bacteria
growth.
Do not store wet or damp parts.
During sanitising with boiling water, prevent the parts from touching the side
of the pot. This can cause the parts to deform or be damaged.
Nouri is for single person use. To avoid contamination, please do not share
the pump.
Note:
Wash the Nouri Pump parts after every use
Sanitise the Nouri Pump parts once a day.
Be careful not to damage parts during cleaning.
4