How To Assemble - Lionelo Floris Manual Del Usuario

13. Seat functions – the product may be used by children aged 3-12 and whose weight
does not exceed 40 kg.
14. When the product is used as a high chair: use the highest position of the seat only.
1. Description of product (see fig. 1):
A.
Front legs (x2)
B.
Rear legs (x2)
C.
Brackets (x2)
D.
Backrest
E.
Elbow rests (x2) / tray guides
F.
Seat
G.
Footrest
H.
Tray
I.
60 mm screw (x8)

2. How to assemble

a) How to assemble legs and elbow rest (see fig. 2):
• Insert the nut (K) in the top hole on the internal side of the rear leg. Put the
front leg and elbow rest against each other and then screw the short screw
(J) with the Allen key. Do the same on the other side.
b) How to assemble backrest (see fig. 3):
Position 4 nuts (L) with horizontal cut outwards and insert them in the holes
•
at the back of the backrest.
• Tighten up long bolts (I) and nuts (L) in holes of front legs (A) with the
Allen key.
3. How to assemble brackets, seat and footrest (see fig. 4):
• Position the nuts (L) with the horizontal notch outwards and insert them
into the holes in the brackets. Align the brackets (C), tighten the screws with
the Allen key against the legs of the chair.
• Use the quick-fastening system to place the seat and footrest at the desired
4-level height.
• When the product is used as a high chair: use the highest position of the
seat only.
EN
J.
Short screw (x2)
K.
Nut (x2)
L.
Nut (x8)
M.
Nut (x4)
N.
Leg supports (x4)
O.
50 mm screw (x4)
P.
Allen key
R.
Tray hook
S.
Tray hook screw
‑ 6 ‑