Machine Cleaning - GFC A3200 Manual De Instrucciones, Uso Y Mantenimiento

Cod. man A3200
INSTRUCTIONS TO OBTAIN ASSISTANCE AND SPARE PARTS
For any communication with Service Centre, to be contacted c/o our offices, always quote
machine type, serial number and year of manufacture written on label, which determine
identification of each single machine and, whenever possible, specify the nature of the
problem encountered or defect present on machine.
In order to guarantee a perfect machine operation, it is necessary that possible replacement
of pieces are exclusively carried out with original spare parts having identical characteristics.

MACHINE CLEANING

Utilize a slightly damp cloth and non-aggressive detergent products.
Before carrying out this operation assure that machine is effectively in stop condition,
disconnecting feed cable from mains.
Infiltration of liquids may damage the electrical part of machine.
DIAGNOSTIC
Anomaly:
Possible cause
Fuse interrupted
Master switch broken
Lamp broken
(*) In order to check condition of the fuse it is necessary to
bring master switch to position "0" (zero), disconnect feed cable,
open small drawer.
(**) For replacing the lamp:
1) unscrew the closure screws
2) extract the plastic body
3) rotate the lamp anticlockwise and extract it
THIS MANUAL IS THE PROPERTY OF
All manuals and user guides at all-guides.com
Operating and maintenance instructions
Rev. 1/2007
Lamp does not switch on
It is possible to replace the fuse
present in the socket drawer (*)
Contact Service Centre
Contact Service Centre for a new
Code N2.680.00.06 (230V)
Code N2.680.00.07 (120V)
3
2
UNDER NO CIRCUMSTANCES MAY IT BE DUPLICATED, EVEN PARTIALLY
ACTIVITY
lamp: (**)
1
EN
Page 6 of 7