The Adapter
1.
Removable Panel
2.
Main Body
3.
Cord
4.
Power Outlet
SWITCHING ADAPTERS
― ―
WARNING: DO NOT HANDLE THE
ADAPTER WITH WET HANDS.
ENSURE THE DEVICE IS TURNED
OFF AND NOT CONNECTED TO
ANY POWER SOURCE BEFORE
SWITCHING ADAPTERS.
Note: Always ensure you are using the correct
removable panel for your region.
To change the removable panel on your
appliance, please follow the below steps:
1.
To remove the current removable panel,
push down on the button to the bottom-
left of the removable panel. Turn the
removable panel anti-clockwise into the
'OPEN' position and lift off.
1
2
3
4
2.
To insert the new removable panel, fit
the grooves on the back into the prongs
on the adapter body. Turn clockwise to
click it into place.
OPERATING INSTRUCTIONS
― ―
•
To turn on your dehumidifier, connect it
to the adapter, plug it into a wall socket
and press the power button.
•
Press the power button again to turn off
the dehumidifier.
Note: When the water tank is full, the light on
your dehumidifier will turn red and it will stop
dehumidifying. Press the power button to turn
off the dehumidifier. Remove the water tank,
empty it and replace it in its original position.
Note: Your adapter may heat up to 70℃ while
the appliance is running.
Note: Your dehumidifier performs best
between 20-30℃ and 60-80% humidity.
Setting the Timer:
To set a timer for how long the appliance
should stay on for, follow the below
instructions:
•
To set a timer for up to four hours, hold
down the light/timer button for three
seconds.
•
The timer indicator light will turn on
when the timer has been set.
•
To cancel the timer, hold down the light/
timer button for three seconds.
•
The timer indicator light will turn off
when the timer has been cancelled.
Changing the Light Colour:
•
Press the light/timer button and the
dehumidifier will begin to cycle through
the light colour options.
English | 4