Product Information - aeolus CDA1155 Instrucciones Originales

c) In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
d) Use the battery only in conjunction with your
FERM AX-POWER product. This measure
alone protects the battery against dangerous
overload.
e) The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short
circuit can occur and the battery can burn,
smoke, explode or overheat.

2. PRODUCT INFORMATION

Intended use
Only use the following AEOLUS 18V battery
platform charger. Using any other charger could
cause serious injury or damage the battery.
The batteries of the AEOLUS 18V battery
platform are interchangeable with all the
AEOLUS battery platform tools.
Technical specifications
Model No
Battery Type
Voltage
Capacity
Recommended charger
Weight
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2.
1. Battery unlock button
2. Battery LED indicators button
3. Battery LED indicators
4. Battery
3. OPERATION
Before any work on the power tool,
remove the battery.
4
Inserting the battery into the machine (Fig. B)
1. Insert the battery (4) into the base of the
machine as shown in Fig. B.
2. Push the battery further forward until it clicks
into place.
Removing the battery from the machine (Fig. B)
1. Push the battery unlock button (1)
2. Pull the battery out of the machine like shown
in Fig. B.
Checking the battery charging status (Fig. A)
• To check the battery charge status, push the
button (2) on battery shortly.
• The battery has 3 lights indicating the charge
level, the more lights that burn, the more
charge the battery has left.
• When the lights are not burning it means
the battery is empty and must be charged
immediately.
CDA1155
Lithium-Ion
18V
3.0 Ah
kg
4. MAINTENANCE
Clean the battery casings regularly with a soft
cloth, preferably after each use. Make sure that
the ventilation openings are free of dust and
dirt. Remove very persistent dirt using a soft
cloth moistened with soapsuds. Do not use any
solvents such as gasoline, alcohol, ammonia,
etc. Chemicals such as these will damage the
synthetic components.
The battery must be charged before first
use.
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
When the machine is not being used
over a longer period of time it is best to
store the battery in charged condition.
Before cleaning and maintenance,
always switch off the machine and
remove the battery pack from the
machine.