INSTALLATION
According to the above installation diagram, install as follows:
Step 1: Please balance to lay down the fan;
Step 2: Insert the castor 1 (quantities4) into the base2
Step 3: Power on the fan start working.
Insect repellent mat hole
HOW TO ADD WATER
1. Open the door as shown in diagram.
2. Remove the tank by pulling it upward; take care not to spill water.
3. Turn the water tank so that the bottom side is facing upwards.
4. Remove the tank cover as shown and add water to the tank.
5. Screw on the tank cover, then flip the tank and return it to the fan body, ensuring that it is balanced.
- 18 -