Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS
SETTING THE FREQUENCY CHANNELS
You can select one of the two available channels for the communication between receiver and
transmitter.
Remember, the same channel must be setting in both devices (receiver and transmitter), otherwise,
will not function.
SETTING UP THE TRANSMITTER
Place the transmitter with in 2 to 3 metres (6 to 10 feet) from a crib or play area. If the child moves
outside this range, the transmitter may not be able to detect his / her sounds.
Tips for better reception:
• Make sure the transmitter is not covered or obstructed for picking up sounds.
• Make sure that nothing touches the antenna during operation.
MONITORING THROUGH THE RECEIVER
Tips for better reception
•
Keep the receiver upright during operation
•
Make sure that nothing touches the antenna during operation.
•
Set the volume level and sensitivity.
USING BELT CLIP
The receiver has a belt clip located on the rear. It is convenient when you move around. Insert your
finger into the cavity of the hook and slide upwards, then hang the belt clip onto your belt.
15
Publicidad
