Beko HTV 8636 XS0 Manual Del Usuario página 24

Press the Temperature Adjustment
key to change the temperature.
C
INFORMATION
• Temperature Adjustment button works only
backwards. For example, if the display
shows 40°C but you want to select 60°C,
you will need to press the button for a few
times until you reach 60°C from 40°C.
C
INFORMATION
• If you scroll to Cold Wash option and
press the Temperature Adjustment
button again, the recommended
maximum temperature for the selected
programme will appear on the display.
To decrease the temperature, press the
Temperature Adjustment button again.
Finally, the Cold light will turn
on, indicating cold wash.
You can also change the temperature after
the washing cycle has started. You can select
the desired temperature after the washing
programme has started. However, you need
to do this before the heating step starts.
5.7 Spin speed selection
Whenever a new programme is
selected, the spin speed recommended
for the selected programme appears
on the Spin Speed indicator.
C
INFORMATION
• It is possible that the recommended spin
speed is not the highest value that can
be selected for the relevant programme.
Press the Spin Speed Adjustment
button to change the spin speed.
Spin speed decreases gradually.
Then, depending on the model of the
product, "Rinse Hold" and "No Spin"
options appear on the display.
24 / EN
-
-
-
-
-
-
C
INFORMATION
• Spin Speed Adjustment button works
only backwards. For example, if the
display shows 800 rpm but you want
to select 1000 rpm, you will need to
press the button for a few times until
you reach 1000 rpm from 800 rpm.
5.7.1 If you want to spin your laundry
after the Rinse Hold function:
- Adjust the Spin Speed.
- Press the Start/Pause button.
Programme will resume. The machine will
drain the water and spin the clothes.
If you want to drain the water at the end
of the programme without spinning,
you can use the No Spin function.
C
INFORMATION
• If you press the Spin Speed adjustment
button in programmes where the spin
speed is not allowed, the spin speed setting
will not change and you will hear a warning.
You can also change the spin speed after
the washing cycle has started. After the
washing cycle has ended, you can press
the spin speed adjustment button to select
a spin speed. However, you need to do
this before the spinning step begins.
5.7.2 Auxiliary function
selection for drying
When you select a new washing
programme, press the Auxiliary Function
Selection button to set the drying
option suitable for this programme.
C
INFORMATION
• If you press the Drying auxiliary function
button in programmes where the drying
step is not allowed, the drying light will
not change and you will hear a warning.
-
-
-
-
Washer-Dryer / User's Manual