Atlantis RAINBOW Manual De Instrucciones página 3

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 5
Notes
• If connection is not possible, please check that the lamp has been properly
installed and that the above steps have been followed.
• The app may not work properly due to software compatibility issues. If this
happens, please restart the phone or reinstall the app.
• The lamp can be connected to one device only at the same time. To connect it to
another phone, please, disconnect the previous device first.
• The speaker can play both the device internal storage and other apps music.
• The music timer is to play music from your device internal storage or other apps.
To turn o the music, please use your mobile phone.
App functions
Timer set: Set timers for lights, music, alarms and sound adjustment.
Color light control: Choose one of the preset color modes or choose it manually by
sliding the dot over the multicolored circle. Adjust color brightness with the upper
bar.
White/Warm/Neutral/Night light control: Choose one of the preset color modes
or choose it manually by sliding the dot over the multicolored circle. Adjust color
brightness and temperature with the upper bars.
Music control: It shows the music stored in your mobile memory.
RGB color scenes: Choose your favorite color e ect from a wide range of di erent
color scenes.
Warnings
• Please, strictly follow this user manual to install and use the product to avoid
accidents.
• Do not disrupt the bulb or modify any component.
• Turn o the power and the main electrical panel before installing or doing
maintenance task to avoid damage from electric shock.
• Do not install the lamp on unstable or unsafe ceilings.
• Do not cover the lamp with blankets or similar objects.
• Do not handle the bulb or any other lamp component for installation, repairing or
checking unless you are a qualified electrician. Wire connecting must follow IEE
electric standard or any other valid national standard.
• Do not install the lamp above hot or wet surfaces.
Maintenance recommendations
• Regularly clean the product with a dry cloth. The product must be disconnected or
switched o when you clean it.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper
connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug
the product.
• Do not wet the product. Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
z• If water or other liquids enter the product interior, unplug it immediately from any
attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be damaged.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.
Safety information
Please read the following instructions before using the device for the first time:
• When you use device keep it away from heat sources (fire) and from humidity sources
(water and other liquids).
• If the product is wet or damaged do not us it.
• Do not use the product with wet hands.
• Do not leave the product in contact with flammable materials.
• Do not expose the product to high temperatures (for example: inside a car during hot
weather)
• Do not throw the product into fire.
• Keep the product away from children.
• Disconnect or switch o the product if you are not going to use for a long period of time.
• Do not use the device if you perceive any visible defects.
• Do not attempt to open or puncture the product. You might damage it.
• Do not use the product with incompatible devices.
• Do not dismount or modify the product. These actions will invalidate the Warranty.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bxplafled40

Tabla de contenido