App buttons
(Power)
(It can be found by removing the side cover)
BUILT-IN MIC SWITCH:
built-in MIC. (It can be found by removing
the side cover)
4
5
8
Built-in MIC*
*
*
MIC, press the Google Assistant/
microphone button on the remote control
and follow the on-screen instructions.
Remote Control sensor / Ambient light
sensor / LED
*1 For other remote control models, refer to the online
Help Guide for details.
*2 The remote control backlight will illuminate when
the light sensor detects the ambient light is low.
Automatic illumination of the backlight can be
turned off.
*3 The buzzer will emit a sound when you use the
remote finder function. Refer to the online Help
Guide for details.
*4 Only for limited region/country/model/language.
*5 Google Assistant or voice search requires an Internet
connection.
*6 Accessibility shortcut is available by pressing and
holding
(Mute).
*7 [TV box setup] setting is required.
*8 Power consumption will increase when the built-in
MIC is enabled as it is always listening.
For more information, refer to the
Help Guide.
Press
remote control and select [Help]. If
[Help] does not exist, select [Edit]
and add [Help].
Turn on/off the
:
To enable the built-in
(Input select) on the
Using the Camera and
Microphone Unit (supplied)
A software update may be required to use the
Camera and Microphone Unit. For the latest
information about software updates for your TV,
visit:
https://www.sony.eu/support
Troubleshooting
General troubleshooting for issues like: black
screen, no sound, frozen picture, TV does not
respond, or network is lost, do the following
steps.
1
Restart your TV by pressing the power button
on the remote control for about five seconds.
The TV will restart. If the TV does not recover,
try unplugging the mains lead then press the
power button on the TV and release it. Wait
for two minutes, and plug in the mains lead.
Or, press the power button on the TV for
about 40 seconds until the TV turns off.
2
Refer to the Help menu shown below.
3
Connect your TV to the Internet and perform
a software update. Sony recommends you to
keep your TV software updated. Software
updates provide new features and
performance improvements.
4
Visit Sony support website (information
provided at the end of this manual).
When you plug in the TV, the TV may not be
able to turn on for a while even if you press
the power button on the remote control or
the TV.
It takes time to initialize the system. Wait for
about one minute, then operate it again.
The remote control does not function.
• Replace the batteries.
The parental lock password has been
forgotten.
• Enter 9999 for the PIN and enter the new PIN.
The screen becomes darker while watching
TV.
• If the whole image or part of the image
remains still, the screen brightness will be
gradually reduced to prevent image retention.
This is not a malfunction of the TV.
GB
5
GB